Product overview on 357 Brass:
All indoor shot and stored 357 Brass, tumble cleaned and fully sorted to remove any nickel plated brass. As we have mentioned on other product pages regarding our brass, this material is 3 times sorted mechanically and 2 times sorted by hand to remove any damages, lives, or foreign calibers. The key component to our sorting process when dealing with either 38 special or 357 magnum is having a machine in house that sorts by height.
The accuracy of our 357 magnum sort is exceptional due to the fact that we are able to sort not only by case diameter but also by height. We are tumble cleaning this material to a nice shine and as with all of our brass we are adding 2% to the overall wieght of the order to ensure you get your money’s worth. The headstamps in this brass include but are not limited to Remington, Federal, Speer, Winchester, and Starline. You can purchase this brass with absolute confidence in overall quality, accuracy of sort, and cleanliness.
More about the 357 magnum brass:
Hornady produces 357 Brass with the same precision, attention to detail and focus on perfection that has made them a world leader in bullets. They measure their brass for consistent wall concentricity, tests pressure calibration to ensure uniform case expansion and hand-inspects each piece.
This dedication to quality ensures proper seating of the bullet both in the case and in the chamber and consistent charges and pressures. The result is optimal velocity and repeatable accuracy from your cartridges. New, unprimed brass. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. Minor dents are normally removed in the first firing and will not affect case life or performance. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
Made In United States of America
|Country of Origin||United States of Americ|
There are no reviews yet.